SRAM X0 Hub
STOP AT NOTHING
Finally, a hub worthy of the X0 name. Built to roll over the toughest mountain terrain, the SRAM X0 Hub proves that being solid doesn’t mean being sluggish. DOUBLE TIME™ ratchet design gives you smooth 6.9-degree engagement—all while keeping everything light and steady. Super-precise SPEEDBALL™ bearings mean lower resistance, faster revolutions and no more time spent readjusting play. From pawl tooth to side cap, we went the extra mile on the X0 Hub—so you have less to worry about on the trail.
Go with what works. X0 Hubs can be customized perfectly to your ride.
- Tapered aluminum axle is stronger without added weight
- All axles types
- 28 or 32 spoke holes
- Sand-blasted black with red label
- Glossy black with silver accents
- 11-speed XD™ Driver Body
- 10-, 9- and 8-speed driver body
- Weight: 130g (front), 250g (rear)
|Weight||130g (front) / 250g (rear)|
|Material||Tapered aluminum axle|
|Options||11-speed XD Driver Body, 10-, 9-, and 8-speed driver body|
|Spoke Holes||28 or 32|
|Rotor Compatibility||International Standard - 6 bolt|
|Axle Diameter||Front: 20x110mm, 15x100mm, QR. Rear: 12x135mm, 12x142mm, QR.|
|Finish||Black, Red and sand blasted; Black, Silver and polished|
|Retail Availability||August 2013|
Ratcheting up the smarts. This straight-aligned, 4-pawl design turns the 26-tooth ratchet ring into 52 points of contact. The result: smooth 6.9-degree engagement without reducing tooth size or offsetting internal geometry—which means serious long-term durability.Read More
Get unbent. 3D forged and machined for lightweight strength, the flanges are angled towards the rim—allowing the spokes to be fully in-line when tensioned. The result: reduced spoke head breakage and better overall durability.Read More
Switching axles has never been easier. Threadless side caps can be installed and replaced by hand—no tools necessary.
SIDE SWAP SYMMETRICAL side caps refuse to take sides. The left side cap is identical to the right one. No need to figure out where each cap is going.
The only adjustment they’ll ever need was made back at the factory. Every part of the ball bearing comes from the exact same supplier—which means that each bearing bore can be precision machined to fit the bearing race exactly. With tolerances this tight, the days of adjusting play after every ride are over.Read More
XD is a new cassette driver body design that allows the use of a 10 tooth small cog and provides an improved interface with the cassette.Read More
USD: $197 - $364
Euro: €178 - €328
Euro MSRP includes VAT
Some variations of this product featured on this page are not available for purchase and are installed on bicycles as original equipment only. See your dealer for details.