TRUVATIV X9 10-Speed Crankset

Truvativ X9 10-Speed Crankset
Alternate views
  • Hollow Forged AL crank arms for lightweight super stiff durability
  • X-Glide 2X10 and 3X10 shifting technology, 26-39, 28-42 and 22-33-44 gearing 
  • New 36-22 and 38-24 chainring options
  • New GXP Bottom Bracket System featuring Gutter Seal Technology
  • Available in the following bottom bracket configurations: PF30, BB30, GXP and GXP PF
Arm MaterialAL-7075
Weight881 Grams (GXP w/BB)
ColorsGrey, White
Gear Ratios26-39, 28-42
BoltsAL Double Hex Type
Recommended Chain10 Speed
MaterialCrank Arm Material Hollow forged , Chainring Inner Position - Material 7075
GXP: External Bottom Bracket

GXP is different — and better. Other systems rely on side-loaded bearings to eliminate play, causing bearing wear. GXP captures the left-side bearing between the spindle and the left crankarm and allows the drive-side bearing to float axially on the spindle. There's no need to side-load bearings during adjustment. No excess wear. And a much simpler installation. Just tighten to the proper specifications and you're ready to roll, worry-free. GXP's two bicycle-specific cartridge bearings and eight seals ensure a smooth, long-lasting ride. Our new Gutter seal system takes a two stage approach in directing contaminates away from the bearings providing longer bearing life. GXP’s new Gutter Seal design also reduces friction, 35% less drag than the current GXP BB, improving rider feel and performance. Gutter seal system has deeper installation tool grooves which provide stability and support while applying torque to the adapter cups. Our new design and material choice has dropped 15g out of our GXP BBs.

Read More
Pressfit 30™

This is a new design led by SRAM. It’s all the best from BB30 and Press-Fit bottom brackets in one captivating package. This bottom bracket is designed for 30mm spindle cranksets. The key difference with PressFit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. PressFit 30 will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life. Frames will need a 46mm inner-diameter bottom bracket shell to accommodate this system. PressFit 30 for road will require a 68mm wide shell while PressFit 30 for MTB will require a 73mm wide shell. Advantages: Huge weight savings, narrow Q-factor, more ankle clearance, greater bearing durability, stiffer/stronger crank construction, simple installation. Allows for larger diameter frame tubes increasing frame stiffness. Drawbacks: Still searching.

Read More
X-Glide™

Imagine being able to shift smoothly at any time, no matter what. We’re talking full-power shifts. Up, down, whatever the trail demands. The benefit of the X-Glide drivetrain is simple, yet, when you think about it, incredibly impactful to the way you ride. Flawless shifting means you’ll never again compromise your speed and power in unpredictable off-road terrain.

Here’s how we did it: TRUVATIV’s crank engineers threw away the old standards and developed a new chainring geometry from the ground up. They precisely paired the different-sized chainrings and redesigned where and how the chain engages with the rings. By aligning the chainring pick-up rivets to the chain pivot pin—rather than the middle of the chain link—you get double the shift opportunities.
 
No more missed shifts, ever. X-Glide puts you in THE RIGHT GEAR, right now.

Read More

MSRP
USD: $298 - $371
Euro: €269 - €335
Euro MSRP includes VAT

Some variations of this product featured on this page are not available for purchase and are installed on bicycles as original equipment only. See your dealer for details.

SRAM Warranty (2.3 MB, PDF)

EN, DE, ES, FR, IT, NL, PT, JA, ZH, PL, DA, CS, EL, RO, FI, SV, GA, BG, MT, SK, SL, HU, ET, LV, LT, KO, RU
28 Pages Updated September 17, 2013
Related Products