THE PATH TO GREATNESS
The SRAM X7 crankset delivers consistent performance every time out. Featuring SRAM’s X-GLIDE™ chainrings, the X7 crankset is engineered for 2x and 3x shifting performance. Flawless shifting means you’ll never again compromise your speed and power in unpredictable off-road terrain. X-GLIDE™ puts you in the right gear, right now.
- X-Glide™ 2x10 and 3x10 shifting technology
- Optimized AL7050 crank arms deliver high-performance strength and power transfer
USD: $159 - $201
Euro: €166 - €210
Euro MSRP includes VAT
Some variations of this product featured on this page are not available for purchase and are installed on bicycles as original equipment only. See your dealer for details.
*Maximum Suggested Retail PriceFind a Dealer Product Matrix
Specifications for X7 Crankset
|Weight||872g (24mm spindle, 175mm, 38-24t, with GXP® bottom bracket)|
|Available Arm Lengths||170mm, 175mm, 180mm|
|Available Ratios||2x10: 42-28t, 39-26t, 38-24t, 36-22t; 3x10: 44-33-22t|
|Compatibility||Performance optimized with SRAM Chains|
|Bottom Bracket||PressFit 30™, BB30, GXP®, PressFit GXP®|
Besides serious weight savings, this bottom bracket means narrow Q-factor, more ankle clearance, greater bearing durability and stronger crank construction.
GXP’s Gutter Seal design cuts friction and weight—improving both feel and performance.
A variant of the external GXP bottom bracket, PressFit cuts weight by up to 40 grams and eases installation by allowing you to press the bearing cups into the frame instead of threading them. It requires no change to the crank spindle length and diameter.
- Pressfit 30™
This is a new design led by SRAM. It’s all the best from BB30 and Press-Fit bottom brackets in one captivating package. This bottom bracket is designed for 30mm spindle cranksets. The key difference with PressFit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. PressFit 30 will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life. Frames will need a 46mm inner-diameter bottom bracket shell to accommodate this system. PressFit 30 for road will require a 68mm wide shell while PressFit 30 for MTB will require a 73mm wide shell. Advantages: Huge weight savings, narrow Q-factor, more ankle clearance, greater bearing durability, stiffer/stronger crank construction, simple installation. Allows for larger diameter frame tubes increasing frame stiffness. Drawbacks: Still searching.
Imagine being able to shift smoothly at any time, no matter what. We’re talking full-power shifts. Up, down, whatever the trail demands. The benefit of the X-Glide drivetrain is simple, yet, when you think about it, incredibly impactful to the way you ride. Flawless shifting means you’ll never again compromise your speed and power in unpredictable off-road terrain.
Here’s how we did it: TRUVATIV’s crank engineers threw away the old standards and developed a new chainring geometry from the ground up. They precisely paired the different-sized chainrings and redesigned where and how the chain engages with the rings. By aligning the chainring pick-up rivets to the chain pivot pin—rather than the middle of the chain link—you get double the shift opportunities.
No more missed shifts, ever. X-Glide puts you in THE RIGHT GEAR, right now.