SRAM Force CX1 Hydraulic Shifter (right-standard)

  • All new design inside and out
  • Revised ergonomics for better finger wrap and a revised shifter paddle for improved finger clearance
  • Individual Reach Adjust™
  • Carbon Brake Lever/ Aluminum Shift Lever
  • Low hand force required
  • Fully sealed system for no contamination
  • Easy bleed access
  • Weight: 447g per wheel (Lever, Caliper, Hose and 140mm Centerline rotor)

 

Some variations of this product featured on this page are not available for purchase and are installed on bicycles as original equipment only. See your dealer for details.

Find a Dealer

Specs

Specifications for SRAM Force CX1 Hydraulic Shifter (right-standard)

Weight447g per wheel (Lever, Caliper, Hose and 140mm Centerline rotor)
Speeds11 Rear
CompatibilitySRAM RED 22, Force 22 & Rival 22 YawTM Front Derailleurs/ Exact Actuation™ Rear Derailleurs/ SRAM RED 22, Force 22 & Rival 22 HRR & HRD
Recommended GroupSRAM Force CX1
Technology Highlight(s)HydroR/ Yaw™/ DoubleTap™/ Zero-Loss™/ ErgoDynamics™ Fit/ Independent E-Z Access Shift-Brake Lever Reach Adjust™
FinishTextured Hood Covers
MaterialCarbon Brake Levers/ Aluminum Shift Levers
Retail AvailabilityJune 2014

Technology

DoubleTap

What It Is: DoubleTap® is the flagship technology leading SRAM’s road gruppo revolution. It’s a simple yet elegant and advanced system that addresses issues - Without compromising on performance, comfort, and weight - with a revolutionary shift/brake lever design.

What It Does: DoubleTap® makes changing gears easier and faster, eliminating the cumbersome and awkward engagement associated with two-lever systems. DoubleTap handles up- and downshifts in one short, sweeping motion, with minimal effort and maximum comfort no matter where you are on the bars.

How It Works: DoubleTap® uses two pawls, one for holding the ratchet wheel, and one for transporting it up and down through the gear change. The pawls are arranged in a way so that they can leapfrog each other depending on how far, and with how much pressure, you push the shift lever. With short, rapid taps the transport pawl (04) moves the ratchet wheel (02) up through the shifting range. Downshifting comes via a longer sweep of the lever (in the same inward direction you upshift, but to an ergonomically maximized 15° angle) with the holding pawl (03) and the transport pawl leapfrogging each other quickly and smoothly.

Location, Location, Location: DoubleTap’s one-motion unidirectional levers (05) work flawlessly no matter what position you’re shifting from. Its double-articulated design (01), which is completely separate from the brake pivot, is easily engaged from the hoods or the drops.

Unlike all other forward controls, DoubleTap® also lets you pull the shift lever in against the bars so you can upshift while sprinting or attacking without giving up a firm grip.

Divide and Conquer: On DoubleTap® controls, the brake and shift levers are completely independent, each operating with their own pivot points. This not only allows for the multiposition functionality, it also eliminates the risk of engaging brakes or shifters unintentionally - an unfortunate side effect of other shift/brake lever designs.

What It Means To You: The efficient and ergonomic design reduces weight and eliminates bulk while adding comfort. You can shift from any position on the bars, even while sprinting, giving you a critical advantage over your competition, and our new single-lever mechanism also lets you shift faster, easier, and with more accuracy, without risk of scrubbing speed or losing your grip. DoubleTap® is the cornerstone of SRAM’s assault on road biking. It’s a new way of shifting - and a new way of thinking - that will put you ahead of the competition, no matter where you find it.

Read More

ErgoDynamics™

It consists of three separate elements to significantly improve your riding experience on SRAM DoubleTap controls. The brake lever is slightly longer than previous DoubleTap road controls to enhance the reach from the drops. The independent reach adjust features on the brake and shift levers are easier to access to quickly adjust for every hand size. Finally, the shape of the hoods has been completely redesigned with a smaller diameter and higher top shape to increase the rider’s control and improve finger wrap.

Read More

Reach Adjust

Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone.

Read More

Yaw™

The front derailleur cage rotates to maintain a consistent angular relationship with the chain. Yaw technology eliminates the need for shifter trim. As a result, shifts feel more direct, more precise, and combined with the new Red crankset and chainrings, delivers an unmatched performance advantage in front shifting.

Read More

ZeroLoss™

ZeroLoss simply means, well, zero loss—when you push on the lever, for an upshift or down shift, the cable is engaged instantly—zero loss of movement. There is no middle-ground where you're waiting for the shift to come. Gear changes are instant and precise.

Read More


Service

Documents Available for SRAM Force CX1 Hydraulic Shifter (right-standard)

See more documents available for SRAM Road products.


SRAM Warranty (2.21 MB, PDF) - 28 Pages

Languages covered: EN, DE, ES, FR, IT, NL, PT, JA, ZH, PL, DA, CS, EL, RO, FI, SV, GA, BG, MT, SK, SL, HU, ET, LV, LT, KO, RU
Updated October 13, 2014

Video