SRAM.com  >  SRAM Road  >  Products  >  SRAM RED

SRAM RED® HRD Shift-Brake Control

Awarded top honors by Germany’s “RoadBike” magazine, SRAM’s HydroR system provides unconditional braking.

UNCONDITIONAL BRAKING

If you believe in better performance then you should believe in hydraulic road (HydroR™) brakes. Our award winning HydroR™ technology is the fulfillment of the promise of better braking, more control, and improved performance in all conditions. SRAM RED is delivering on the promise of braking confidence and security that brings speed control and stability to a new level.

  • Retains our 2015 design advances with a fresh new look
  • RED ergonomics including Reach Adjust
  • SRAM Road 11-speed compatible
  • Optimized power and modulation for higher speeds and more control
  • Refined lever body design is more comfortable
  • Easy access bleed port means convenient service
  • Shift paddle design is lightweight and offers improved finger clearance

 

Alternate views

MSRP* (Per wheel (Includes Shift/Brake hydraulic lever, hose and caliper) )
USD: $425 - $493
Euro: €443 - €514
Euro MSRP includes VAT

Please see our Product Authentication Warning

Some variations of this product featured on this page are not available for purchase and are installed on bicycles as original equipment only. See your dealer for details.

*Maximum Suggested Retail Price

Find a Dealer
Compatibility Notice
11-Speed Product Compatibility Information SRAM 11 speed components were designed to be paired with matching SRAM 11 speed components to ensure proper function. We can only guarantee the performance when used with the correct SRAM branded components.
SRAM RED® HRD Shift-Brake Control

Specs

Specifications for SRAM RED® HRD Shift-Brake Control

Weight(post mount) 449g (Left lever, front caliper, 800mm hose, DIR, 160mm rotor and hardware)
Speeds11
CompatibilitySRAM RED® & Force Yaw™ Front Derailleurs, Exact Actuation™ Rear Derailleurs, SRAM RED® HRD
Recommended GroupSRAM RED® , SRAM Force
Technology Highlight(s)HydroR// Yaw™/ DoubleTap™/ Zero-Loss™ on Front & Rear/ ErgoDynamics™ Fit/ Independent E-Z Access Shift-Brake lever Reach Adjust™
FinishFalcon grey & black anodized
MaterialCarbon shift-brake levers, Titanium hardware, Textured hood covers, Forged aluminum disc caliper
OtherSteel-backed organic pads, DOT 5.1 fluid

Technology

Connectamajig

Connectamajig™ is the coupling hose that makes initial set-up of hydraulic systems easy, fast and convenient. The intimidation of hydraulics is gone with a push and a twist; it’s just that easy. Connectamajig allows for several disconnects and reconnects before a system bleed is required.

Read More

DOT 5.1™

Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. We found that in our systems DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions.

Read More

DoubleTap

DoubleTap® makes changing gears easier and faster, eliminating the cumbersome and awkward engagement associated with two-lever systems. DoubleTap handles up- and downshifts in one short, sweeping motion, with minimal effort and maximum comfort no matter where you are on the bars.

DoubleTap® uses two pawls, one for holding the ratchet wheel, and one for transporting it up and down through the gear change. The pawls are arranged in a way so that they can leapfrog each other depending on how far, and with how much pressure, you push the shift lever.

With short, rapid taps the transport pawl (04) moves the ratchet wheel (02) up through the shifting range. Downshifting comes via a longer sweep of the lever (in the same inward direction you upshift, but to an ergonomically maximized 15° angle) with the holding pawl (03) and the transport pawl leapfrogging each other quickly and smoothly.

Location, Location, Location: DoubleTap’s one-motion unidirectional levers (05) work flawlessly no matter what position you’re shifting from. Its double-articulated design (01), which is completely separate from the brake pivot, is easily engaged from the hoods or the drops.

Unlike all other forward controls, DoubleTap® also lets you pull the shift lever in against the bars so you can upshift while sprinting or attacking without giving up a firm grip. On DoubleTap® controls, the brake and shift levers are completely independent, each operating with their own pivot points. This not only allows for the multiposition functionality, it also eliminates the risk of engaging brakes or shifters unintentionally—an unfortunate side effect of other shift/brake lever designs.

Read More

ErgoDynamics™

Longer brake levers, independent reach adjust for the brake and shift levers, and optimized hood shape give riders of any size comfort and easy access to the controls.

Read More

Reach Adjust

Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone.

Read More

Yaw™

The front derailleur cage rotates to maintain a consistent angular relationship with the chain. Yaw technology eliminates the need for shifter trim. As a result, shifts feel more direct, more precise, and combined with the new Red crankset and chainrings, delivers an unmatched performance advantage in front shifting.

Read More

ZeroLoss™

ZeroLoss simply means, well, zero loss—when you push on the lever, for an upshift or down shift, the cable is engaged instantly—zero loss of movement. There is no middle-ground where you're waiting for the shift to come. Gear changes are instant and precise.

Read More


Service

Documents Available for SRAM RED® HRD Shift-Brake Control

See more documents available for SRAM Road products.


SRAM Warranty (2.19 MB, PDF) - 28 Pages

Languages covered: EN, DE, ES, FR, IT, NL, PT, JA, ZH, PL, DA, CS, EL, RO, FI, SV, GA, BG, MT, SK, SL, HU, ET, LV, LT, KO, RU
Updated June 16, 2015