SRAM® S-700 DoubleTap® Shifters/ Hydraulic Rim Brake
- 10 Speed Compatible only
- All new design inside and out
- Revised ergonomics for better finger wrap and a revised shifter paddle for improved finger clearance
- Individual Reach Adjust
- Aluminum shift & brake levers
- Low hand force required
- Fully sealed system for no contamination
- Easy bleed access
- Tool-free contact point adjust
- Tire clearance of 28mm and Zipp Firecrest® rim compatibility (27.4mm)
- Forged aluminum arms with SwissStop® pad compound
Some variations of this product featured on this page are not available for purchase and are installed on bicycles as original equipment only. See your dealer for details.Find a Dealer
Specifications for SRAM® S-700 DoubleTap® Shifters/ Hydraulic Rim Brake
|Weight||422g Per wheel (lever, caliper, hose 600mm)|
|Speeds||10 Rear/ 2 Front|
|Compatibility||SRAM RED® 10-speed, Force, Rival & Apex front derailleur/ 10-speed Exact Actuation rear derailleurs/ SRAM S-700 HRR & HRD|
|Recommended Group||SRAM Rival®|
|Technology Highlight(s)||HydroR™/ DoubleTap®/ ZeroLoss™ on front & rear/ Shift-brake lever Reach Adjust / Connectamajig™|
|Finish||Textured hood covers|
|Material||Aluminum brake levers, Aluminum shift levers , Forged aluminum arms|
|Other||SwissStop® pad compound, Use DOT 5.1 fluid|
Connectamajig™ is the coupling hose that makes initial set-up of hydraulic systems easy, fast and convenient. The intimidation of hydraulics is gone with a push and a twist; it’s just that easy. Connectamajig allows for several disconnects and reconnects before a system bleed is required.
- DOT 5.1™
Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. We found that in our systems DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions.
DoubleTap® makes changing gears easier and faster, eliminating the cumbersome and awkward engagement associated with two-lever systems. DoubleTap handles up- and downshifts in one short, sweeping motion, with minimal effort and maximum comfort no matter where you are on the bars.
DoubleTap® uses two pawls, one for holding the ratchet wheel, and one for transporting it up and down through the gear change. The pawls are arranged in a way so that they can leapfrog each other depending on how far, and with how much pressure, you push the shift lever.
With short, rapid taps the transport pawl (04) moves the ratchet wheel (02) up through the shifting range. Downshifting comes via a longer sweep of the lever (in the same inward direction you upshift, but to an ergonomically maximized 15° angle) with the holding pawl (03) and the transport pawl leapfrogging each other quickly and smoothly.
Location, Location, Location: DoubleTap’s one-motion unidirectional levers (05) work flawlessly no matter what position you’re shifting from. Its double-articulated design (01), which is completely separate from the brake pivot, is easily engaged from the hoods or the drops.
Unlike all other forward controls, DoubleTap® also lets you pull the shift lever in against the bars so you can upshift while sprinting or attacking without giving up a firm grip. On DoubleTap® controls, the brake and shift levers are completely independent, each operating with their own pivot points. This not only allows for the multiposition functionality, it also eliminates the risk of engaging brakes or shifters unintentionally—an unfortunate side effect of other shift/brake lever designs.
- Reach Adjust
Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone.
ZeroLoss simply means, well, zero loss—when you push on the lever, for an upshift or down shift, the cable is engaged instantly—zero loss of movement. There is no middle-ground where you're waiting for the shift to come. Gear changes are instant and precise.