SRAM® S-900 Crankset
The new SRAM S-900 offers an option between the SRAM Rival® OCT™ and the SRAM Force® Crankset. The S-900 utilizes a new unidirectional carbon crank arm with a forged alloy spider. This crank arm is also used with SRAM’s SRM™ and Quarq® Power- Meter systems. The SRAM S-900 includes our proven PowerGlide™ chainrings and GXP® BB system. It comes in full-size and compact ratios and in multiple crank arm lengths.
USD: $237 - $288
Euro: €267 - €309
Euro MSRP includes VAT
Some variations of this product featured on this page are not available for purchase and are installed on bicycles as original equipment only. See your dealer for details.
*Maximum Suggested Retail PriceFind a Dealer
Specifications for SRAM® S-900 Crankset
|Arm Material||Unidirectional carbon, Forged alloy spider|
|Chainring Material||PG chainrings with hard-anodized coating|
|Weight||795g w/BB (GXP®)|
|Available Arm Lengths||170mm, 172.5mm, 175mm, 177.5mm|
|Available Ratios||53/39, 50/36, 50/34|
Besides serious weight savings, this bottom bracket means narrow Q-factor, more ankle clearance, greater bearing durability and stronger crank construction.
GXP’s Gutter Seal design cuts friction and weight—improving both feel and performance.
A variant of the external GXP bottom bracket, PressFit cuts weight by up to 40 grams and eases installation by allowing you to press the bearing cups into the frame instead of threading them. It requires no change to the crank spindle length and diameter.
- Pressfit 30™
This is a new design led by SRAM. It’s all the best from BB30 and Press-Fit bottom brackets in one captivating package. This bottom bracket is designed for 30mm spindle cranksets. The key difference with PressFit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. PressFit 30 will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life. Frames will need a 46mm inner-diameter bottom bracket shell to accommodate this system. PressFit 30 for road will require a 68mm wide shell while PressFit 30 for MTB will require a 73mm wide shell. Advantages: Huge weight savings, narrow Q-factor, more ankle clearance, greater bearing durability, stiffer/stronger crank construction, simple installation. Allows for larger diameter frame tubes increasing frame stiffness. Drawbacks: Still searching.