Rival 1 Crankset
$176 - $197
Ships after .
Currently out of stock until .
The SRAM Rival 1 cranksest delivers immense performance across a broad variety of bikes and disciplines. Paved or not. Cyclocross or triathlon. Road racing or unchartered journeys. Rival®1 provides a single-minded proposition to meet each challenge and expand your limits.
$176 - $197
- Forged aluminum arms with detachable spider
- X-SYNC™ chainring-an integral component of the SRAM 1x™ drivetrain
- X-SYNC™ tall, square tooth design provides maximum chain control
- Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain
- Mud and debris-clearing recesses for the inner chain links and rollers
Besides serious weight savings, this bottom bracket means narrow Q-factor, more ankle clearance, greater bearing durability, and stronger crank construction.
GXP’s gutter seal design cuts friction, durability and weight—improving both feel and performance.
It’s all the best from BB30 and Press-Fit bottom brackets in one captivating package. This bottom bracket is designed for 30mm spindle cranksets. The key difference with PressFit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. PressFit 30 will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life.
SRAM X-SYNC 1x chainrings provide the highest level of performance and durability. The SRAM X-SYNC tall square teeth edges engage the chain earlier than traditional triangle shaped teeth. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-SYNC chainrings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-SYNC rings are an integral part of the SRAM 1x drivetrain. Accept no imitation.
A variant of the external GXP bottom bracket, PressFit cuts weight by up to 40 grams and eases installation by allowing you to press the bearing cups into the frame instead of threading them. It requires no change to the crank spindle length and diameter.
|Crank arm length||165mm, 170mm, 172.5mm, 175mm|
|BB Spindle Interface||30mm, GXP|
|BB Compatibility||BB30/PF30-68mm, GXP/PF GXP 68mm|
|Bolt Circle Diameter (BCD)||110 BCD|
|Chainring Size||40T, 42T, 44T, 50T|
Installation. Service. Compatibility. Find all the documentation needed to set up, use, and maintain your components in the SRAM Service hub.Visit product service page